Table of Contents
Advertisement
D a m p e r S e r v i c e - 3 0 ™ , J u d y ™ , R e c o n ™ - G o l d
2 0 0 H o u r S e r v i c e
Inspect each part for scratches. Do not scratch any sealing surfaces
when servicing your suspension. Scratches can cause leaks.
When replacing seals and o-rings, use your fingers or a pick to remove
the seal or o-ring. Spray isopropyl alcohol on each part and clean with
a clean lint-free shop towel.
Apply Liquid-O-Ring® PM600 or SRAM® Butter grease to the new seals
and o-rings. If a brush is used to apply grease, confirm there are no
loose bristles in the grease or on the part.
RL: Turn the compression adjuster knob counter-clockwise, to the full
1
open position, until it stops.
Remove the compression knob retaining screw.
Remove the knob.
Recon Gold RL: Remove the detent spring.
D a m p e r R e m o v a l
N OTIC E
PM600
2.5 mm
Recon Gold RL
Damper Service - 30™, Judy™, Recon™ - Gold
SRAM Butter
48
Hide quick links:
Advertisement
Table of Contents
