Rock Shox 30 Service Manual page 51

Remove the fork from the work stand and pour the suspension oil into
7
an oil pan.
Clamp the fork into the work stand and push the rebound damper shaft
8
into the upper tube to protect it while removing the retaining ring.
Remove the rebound damper seal head retaininer ring.
Do not scratch the rebound damper shaft. Scratches will allow oil to
leak into the lower leg, resulting in reduced damping performance.
Thread the hollow bottom bolt onto the rebound damper shaft and pull
9
the shaft out until it stops.
Remove the bolt.
Remove the rebound damper and seal head.
10
NOTI CE
Retaining Ring Pliers
51
Damper Removal