Rebound Damper Installation - Rock Shox 30 Service Manual

2 0 0 H o u r S e r v i c e
Insert the seal head into the upper tube through the crown, and push it
1
down just below the upper tube threads. Use a dowel if needed.
Use care to avoid damaging the outer o-ring.
Push the seal head down to the end of the upper tube.
2
While pushing the dowel down firmly against the seal head to secure it,
3
use the palm of you hand to press the retainer onto the end of the seal
head until it snaps into place.
Confirm the retainer is installed securely.
R e b o u n d D a m p e r I n s t a l l a t i o n
NOTI CE
Dowel (15 mm - 17 mm diameter)
Dowel (15 mm - 17 mm diameter)

Rebound Damper Installation

68