Rock Shox 30 Service Manual page 28

Remove the negative air assembly.
5
Recon™ Gold 130 mm - 150
out bumper, and piston bumper
Clean the air spring shaft and piston, and inspect them for scratches.
Remove the top out bumper and All-Travel spacer (if installed).
Remove and discard the positive air piston o-ring.
6
Apply grease to a new o-ring and install it.
Do not scratch the air piston. Scratches will cause air to leak.
Remove the inner and outer o-rings from the negative air seal head, or
7
negative air piston (Recon Gold 130 mm - 150 mm), and discard them.
Clean the seal head.
Apply grease to a new outer o-ring and install it.
Do not scratch the negative air piston. Scratches will cause air to leak.
mm: Remove the negative air piston, top
NOTI CE
NOTI CE
Air Spring Removal and Service - Gold
28