Air Spring Installation - Gold - Rock Shox 30 Service Manual

2 0 0 H o u r S e r v i c e A i r S p r i n g I n s t a l l a t i o n - G o l d
Apply a liberal amount of grease to the inside of the upper tube, from
1
the end of the tube to approximately 60 mm into the tube.
Apply a liberal amount of grease to the air spring shaft.
2
Install the top out bumper and All-Travel spacer (if originally equipped,
3
or added if travel is reduced) onto the negative air seal head.
Install the assembly onto the air shaft.
Recon™ Gold 130 mm - 150 mm: Install the top out bumper, negative air
piston, piston bumper, retaining washer, wave spring, and base plate, in
that order, onto the air shaft.
32

Air Spring Installation - Gold