Rock Shox 30 Service Manual page 23

Soak the new foam rings in suspension oil. Install the new foam rings.
4
Remove the outer wire spring from each new seal and set them aside.
5
Insert the narrow end of a new seal into the recessed end of the
6
RockShox® Dust Seal Installation tool.
30™ / Judy™: 28 mm / 30 mm Dust Seal Installation Tool
Recon™: 32 mm Dust Seal Installation Tool
Stabilize the lower leg on a bench top. Hold the lower leg steady and
7
press the seal into the lower leg until the top of the seal is flush with
the top of the lower leg.
Repeat on the other side.
Only press the seal into the lower leg until it is flush with the top
surface of the lower leg. Pressing the wiper seal below the top surface
of the lower leg will compress the foam rings.
NOTI CE
15wt
Dust Seal Installation Tool
Dust Seal Installation Tool
23
Lower Leg Seal Service