Lower Leg Assembly; 50/200 Hour Service; Lower Leg Installation - Rock Shox 30 Service Manual

L o w e r L e g A s s e m b l y
5 0 / 2 0 0 H o u r S e r v i c e
Clean the upper tubes.
1
Install the lower leg assembly onto the upper tubes and slide it just
2
enough to engage the upper bushings with the upper tubes.
Make sure both wiper seals slide onto the tubes without folding the
outer lip of either seal.
The inside bottom of the lower leg should not contact the spring or
damper shafts. A gap between the shaft ends and the lower leg bolt
holes should be visible.
Position the fork at an angle with the bolt holes oriented upward.
3
Inject suspension oil into each lower leg through the bottom bolt holes.
Do not exceed the recommended oil volume per leg as this can
damage the fork.
2018 Spring
30™ Gold Solo Air™
Coil
30 Silver
Judy™ Gold Solo Air
Judy Silver
Recon™ TK Coil
Recon RL
Solo Air
Recon Gold
L o w e r L e g I n s t a l l a t i o n
NOTI CE
NOTI CE
Damper Spring
Oil
Side Side
Weight
Volume (mL)
3-9
6-12
3-9
15 3-9
6-12
3-9
15wt RockShox® Bleed Syringe
73

Lower Leg Assembly