Configuration Cloning Utility (Ccu) - Honeywell Thor VM2 User Manual

Configuration Cloning Utility (CCU)

This utility provides an automated process to read the configuration settings from one Thor VM2 and then apply those settings
to one or more other Thor VM2s with the same operating system. The Configuration Cloning Utility (CCU) is installed as part of
the factory software load. Configuration settings for the following items may be included:
• RFTerm
• Honeywell Control Panels:
• USB powered in Sleep
• Enable/disable touch screen
• Defroster settings
• COM port pin 9 +5V or RI
The CCU allows a configuration file (ccf file) to be created by:
• Reading the current program settings from the source Thor VM2
• Reading the default program settings from a ddf file.
If desired, settings can be modified (advanced user only) before saving the ccf file. If any changes have been made, the CCU
can also apply them to the source Thor VM2.
The configuration file can then be copied and deployed to the destination Thor VM2(s). Options include:
• Import changes only - Only those configuration settings which have been modified from their default value are applied to the
destination Thor VM2. All other settings on the destination Thor VM2 are left unchanged.
• Import changes and defaults - All configuration settings are applied to the destination Thor VM2. If a setting was modified on
the source Thor VM2 the modified value is applied to the destination Thor VM2. Otherwise the default value is applied for that
setting on the destination Thor VM2.
The Configuration Cloning Utility can be run as a GUI or command line interface.
5 - 102