Security - Honeywell Thor VM2 User Manual

If the standard Internet Explorer that is shipped with the mobile device is desired, it should be treated like any
other application. This means that IEXPLORER.EXE should be specified in the Application text box and the Inter-
net application should be entered in the command line. In this case, do not check the Internet checkbox.

Security

Hotkey
Specify the hotkey sequence that triggers AppLock to switch between administrator and user modes and the pass-
word required to enter Administrator mode. The default hotkey sequence is Shift+Ctrl+A.
nd
A 2 key keypress is an invalid keypress for a hotkey sequence.
Move the cursor to the Hot Key text box. Enter the new hot key sequence by first pressing the Shift state key fol-
lowed by a normal key. The hotkey selected must be a key sequence that the application being locked does not
use. The hotkey sequence is intercepted by AppLock and is not passed to the application.
Input from the keyboard or Input Panel is accepted with the restriction that the normal key must be pressed from
the keyboard when switching modes. The hotkey sequence is displayed in the Hot key text box with "Shift", "Alt",
and "Ctrl" text strings representing the shift state keys. The normal keyboard key completes the hotkey sequence.
The hotkey must be entered via the keypad. Some hotkeys cannot be entered via the Input Panel. Also, hotkeys
entered via the SIP are not guaranteed to work properly when switching operational modes.
For example, if the 'Ctrl' key is pressed followed by 'A', "Ctrl+A" is entered in the text box. If another key is pressed
after a normal key press, the hotkey sequence is cleared and a new hotkey sequence is started.
A normal key is required for the hotkey sequence and is unlike pressing the normal key during a mode switch; this
key can be entered from the SIP when configuring the key. However, when the hotkey is pressed to switch modes,
the normal key must be entered from the keypad; it cannot be entered from the SIP.
Password
Move the cursor to the Password text box. The passwords entered in the Password and Confirm Password fields
must match. Passwords are case sensitive.
When the user exits the Administrator Control panel, the two passwords are compared to verify that they match. If
they do not match, a dialog box is displayed notifying the user of the error. After the user closes the dialog box, the
Security Panel is displayed and the password can then be entered and confirmed again. If the passwords match,
the password is encrypted and saved.
5 - 26