Honeywell Thor VM2 User Manual page 289

Message
Could not create event
EVT_HOTKEYCHG
Could not hook keyboard
Could not start thread Hot-
KeyMon
Ctrl after L or X
Ctrl pressed
Ctrl
Decrypt acquire context
failure
Decrypt acquired context
OK
Decrypt create hash failure Unable to decrypt password.
Decrypt created hash OK
Decrypt failure
Decrypt import key failure
Decrypt imported key OK
Encrypt acquire context
failure
Encrypt acquire encrypt
context failure
Encrypt acquired encrypt
context OK
Encrypt create hash failure Unable to encrypt password.
Encrypt create key failure
Exit ToUser-Registry read
failure
Exit verify password-no
pwd set
Exit verify password-re-
sponse from dialog
Found taskbar
Getting address of key-
board hook init procedure
Getting configuration from
registry
Getting encrypt pwd length The length of the encrypted password is being calculated.
Hook wndproc failure
Hook wndproc of open app
failure
Hot key event creation fail-
ure
Hot key pressed
Explanation and/or corrective action
The keyboard filter uses this event at the Administrator Control panel. The event
could not be created.
If the keyboard cannot be controlled, AppLock cannot process the hotkey. This
failure prevents a mode switch into user mode.
The keyboard filter must watch for hot key changes. The watch process could
not be initiated.
Processing the backdoor entry.
The Ctrl key has been pressed and trapped by the HotKey processing.
Processing the hotkey and backdoor entry.
Unable to decrypt password.
Decryption process ok.
Decryption process ok.
Unable to decrypt password.
Unable to decrypt password.
Decryption process ok.
Unable to encrypt password.
Unable to encrypt password.
Encrypt password process successful.
Unable to encrypt password.
The AppName value does not exist in the registry so user mode cannot be en-
tered.
Exiting password verification.
Exiting password verification.
The handle to the taskbar has been found so that AppLock can disable it in user
mode.
AppLock is retrieving the address of the keyboard hook.
The AppLock configuration is being read from the registry. This occurs at initial-
ization and also at entry into user mode. The registry must be re-read at entry
into user mode in case the administration changed the settings of the application
being controlled.
AppLock is unable to lock the application. This could happen if the application
being locked encountered an error after performing its initialization and shut it-
self down prior to being locked by AppLock.
The application is open, but AppLock cannot lock it.
The Admin applet is unable to create the hotkey notification.
Processing the hotkey and backdoor entry
Level
LOG_ERROR
LOG_ERROR
LOG_ERROR
LOG_EX
LOG_EX
LOG_EX
LOG_ERROR
LOG_EX
LOG_ERROR
LOG_EX
LOG_ERROR
LOG_ERROR
LOG_EX
LOG_ERROR
LOG_ERROR
LOG_EX
LOG_ERROR
LOG_ERROR
LOG_
PROCESSING
LOG_
PROCESSING
LOG_
PROCESSING
LOG_
PROCESSING
LOG_
PROCESSING
LOG_
PROCESSING
LOG_EX
LOG_ERROR
LOG_ERROR
LOG_ERROR
LOG_EX
10 - 11