Password; Pc Connection - Honeywell Thor VM2 User Manual

Password

Start > Settings > Control Panel > Password
Use this panel to set Thor VM2 user access to control panels and power up password properties.
Important: This password must be entered before performing a Load Factory Defaults.
If entering a power-on or screen saver password does not allow you to disable this password protection or perform a Load
Factory Defaults, contact Technical Assistance
Factory Default Settings
Password
Enter password at Power On
Enter password at Remote Desktop Screen Saver
• The password and password settings are saved during a warm boot and a restart.
• The screensaver password affects the Remote Desktop screensaver only.
• After a password is assigned and saved, each time a Settings > Control Panel option is selected, the user will be
required to enter the password before the Control Panel will open.
• The screensaver password is the same as the power-on password. They are not set independently.
• A screensaver password cannot be created without first enabling the "Enable password protection at power-on"
checkbox.
• The screensaver password is not automatically enabled when the "power-on" checkbox is enabled.
Enter the password in the Password text box, then press Tab and type the password again to confirm it.
Enable the power-on checkbox and, if desired, the screensaver checkbox.
A changed/saved password is in effect immediately.
Use this panel to set Thor VM2 user access to control panels and power up password properties.
Important: This password must be entered before performing a Load Factory Defaults.
If entering a power-on or screen saver password does not allow you to disable this password protection or perform a Load
Factory Defaults, contact Technical Assistance

PC Connection

Start > Settings > Control Panel > PC Connection
Use these options to control a cabled connection (USB, serial) between the Thor VM2 and a nearby desktop/laptop com-
puter.
Factory Default Settings
Enable direct connection
Connect using
(page 11-1).
Blank
Disabled
Disabled
(page 11-1).
Enabled
USB Client
5 - 79