Ndislog; Options - Honeywell Thor VM2 User Manual

Options

Options
pkt_size in
bytes
cap_size in
bytes
.cap file
Run cmd
Performs the command selected. For example, to run Netlog and modify the packet size do the following:
1. Select load from the Commands list and click the Run cmd button.
2. Select stop from the Commands list and click the Run cmd button.
3. Select options from the Commands list, enter the new packet size in the Options list and click the Run cmd
button.

NDISLog

NDISLog creates a .TXT file that can be viewed with any text editor program that supports .TXT files.
Command
Command
start
stop
file
Specifies the name of the file to which NDISLog information is stored.
Save File
Stores the file name.
Run cmd
Performs the selected start or stop command.
5 - 74
Function
Specifies the maximum packet size captured in bytes. This option should only be run after you have
called load and stop. Default is 5000.
Specifies the maximum size of Netlog0.cap or Netlog1.cap in bytes. This option should only be run
after you have called load and stop. Default is 500,000.
Specifies the name of the file to which network traffic information is saved. This option should only
be run after you have called load and stop. Default is \netlog.
Function
Starts logging the network traffic.
Stops logging network traffic.