Honeywell Thor VM2 User Manual page 102

6. Locate the SIM card installation slot, as highlighted to the right.
7. Slide the SIM card into the slot.
Note: The entire SIM slot is not visible due to the design of the Thor VM2 case. However, the
entire slot is shown below to help with installation.
8. Do not force the SIM into the slot. The SIM slot is not a "spring lock" holder. When the SIM card is
fully inserted, it will trip the SIM detect switch as indicated by the arrow below. The access panel
has a tab that holds the SIM card in place.
SIM
9. Reattach the access panel, torquing the screws to 4-5 inch pounds.
10. If the SIM card is not detected, contact
11. If removed, reinstall the Thor VM2 in the dock.
12. Resume the Thor VM2 from suspend.
13. Restart the Thor VM2 (Start | Settings | Control Panel | Registry and tap the Restart button).
4 - 52
SIM
Technical Assistance (page 11-1) for troubleshooting.