Step 3: Process Completion - Honeywell Thor VM2 User Manual

Enter the bar code password, if any.
Click Start.
Bar code 1 must be scanned first. The scanned data is displayed in the "Data" text box. The password, if any, entered above
is compared to the password entered when the bar codes were created.
If the passwords match, the bar code data is processed and the screen is updated to reflect the number of bar codes
included in the set.
If the passwords do not match, an error message is displayed. The current screen can be closed using the X box in the
upper right corner. The password can be re-entered and Bar Code 1 scanned again.
The remaining bar codes may be scanned in any order. After a bar code is scanned, that bar code is removed from the
"Remaining:" list and placed in the "Scanned:" list.

Step 3: Process Completion

After the last bar code is scanned, the settings are automatically applied.
Once configured, the Thor VM2 is warmbooted. Once connected to the wireless network and the Mobile Device Server, any
software updates and additional configuration data are downloaded.
7 - 16