System; General; Memory - Honeywell Thor VM2 User Manual

System

Start > Settings > Control Panel > System
Use these Thor VM2 panels to:
• Review System and mobile device data and revision levels.
• Adjust Storage and Program memory settings.
• Assign a device name and device descriptor.
Factory Default Settings

General

No user interaction

Memory

1/4 storage, 3/4 program memory
Device Name Unique to equipment type
Device Description Unique to equipment type
Copyrights No user interaction
General
System: This screen is presented for information only. The System parameters cannot be changed by the user.
Computer: The processor type is listed. The type cannot be changed by the user. Total computer memory and the
identification of the registered user is listed and cannot be changed by the user.
Memory sizes given do not include memory used up by the operating system. For example, a system with 128 MB may
only report 99 MB memory, since 29 MB is used by the operating system. This is actual DRAM memory, and does not
include internal flash used for storage.
Memory
Move the slider to allocate more memory for programs or storage. If there isn't enough space for a file, increase the
amount of storage memory. If the mobile device is running slowly, try increasing the amount of program memory.
5 - 97