Ups Status Led; Ssd (Solid State Drive) Led - Honeywell Thor VM2 User Manual

UPS Status LED

The color of the UPS LED identifies the charge level, while the behavior of the LED identifies the charging state.
Charge Level
LED Color
Green
Amber
Red
Charging State
LED Behavior
Slow Blink
(1 sec. on, 3 sec. off)
Fast Blink
(1/2 sec. on, 1/2 sec. off)
On
Off

SSD (Solid State Drive) LED

LED Behavior
Flashing Green
Off
3 - 16
Status
Fully charged (>90%)
• Less than fully charged, but more than 2 minutes runtime remaining
• Out of Safe Charging Temperature Range
approximately -10°C and 35°C ambient temperature
• No UPS present
• Charging Timeout (page 3-3) Not fully charged after 4 or 8 hours depending on software
revision.
Low battery, less than 2 minutes runtime until shutdown
Status
Charging
UPS supplying power and discharging
Neither charging or discharging
Unit is off or is in Suspend
Status
SSD read or write activity
No SSD read or write activity
(page 3-3) Charging only occurs between