Table of Contents
Advertisement
Chapter 3 - Installing the Device
Removing the Chassis Cover
1. Make sure the system and all other peripheral devices connected to it has been powered-off.
2. Disconnect all power cords and cables.
3. Remove the 5 mounting screws to open the cover on the bottom of the system.
4. 2 Mini PCIe slots, the SODIMM socket and the SIM card socket are readily accessible after
removing the chassis cover.
SIM card socket
SODIMM socket
Chapter 3 Installing the Device
Chapter 3
Installing the SATA Drive
1. Fasten the 4 mounting screws that secure HDD brackets firmly to the system cover.
Mounting screw
2. Align the mounting holes of the SATA drive with the mounting holes on the HDD brackets and
then use the mounting screws provided to secure the drive in place.
Mini PCIe
Mini PCIe
11
HDD bracket
Mounting screws
SATA drive
HDD bracket
Mounting screw
www.dfi.com
Advertisement
Table of Contents
