Installing A 2.5" Or 3.5" Sata Drive - DFI WM343-MB Installation Manual

Installing a 2.5" or 3.5" SATA Drive

1. Remove the thumb screws that secure the drive bay to the
chassis and then remove the drive bay.
Thumb screws
Thumb screws
2. Secure the hard drive to the drive bay. Align the mounting holes
of the SATA drive and the mounting holes on the HDD brackets.
Use 4 mounting screws to install the hard drive onto the drive
bay.
Drive bay
Mounting screw
3.5" SATA Drive
2