Using Pc Cards To Load Your Programs; Drives; Using Ata Cards To Boot Your Computer; Booting - Intermec 6220 User Manual

SECTION 2

Using PC Cards to Load Your Programs

Drives

"
"
"
"

Using ATA Cards to Boot Your Computer

Booting

In order to boot your hand-held computer using an ATA
card, the card in the drive must be formatted. If the ATA
card is formatted as a DOS system ATA, it will boot as drive
C. Otherwise, use Pen*Key Utilities to select drive E as
your boot drive.
If you have selected a boot drive such as C or E that no lon-
ger should be selected as the boot drive, press and hold F4
while you reset your computer. You will then boot to drive
D, Pen*Key Utilities can then be used to select a different
boot drive if necessary.
Drive C, DOS system ATA card
Drive E, Non--system ATA card
Drive C, RAM (if formatted)—power required to pro-
tect contents
Drive D, ROM files in flash—no power needed
6220 Hand-Held Computer User's Guide
Hand-Held Computer Operation
2-9