3D Systems ProX DMP 300 User Manual page 58

Event browser
The Event browser tool is composed of 4 tabs:
• Version tab
It lists the different software versions and when they have been installed .
• Manufacturing tracking tab
Each event occured during a preparation or a job is traced and stored on a tracking file. Each time a new sintering plate is
loaded into the printer, a tracking file is created. As long as a tracking file is existing on the printer, it can be viewed and
exported .
When the plate is unloaded, its tracking plate file will be closed.
The format of the tracking file is ".xml", and is composed by: PrinterType_SerialNumber_PlateNumber
• Printer type (e .g ProX300)
• Serial number (e .g 1122333)
• Plate number: the number entered during the plate loading (see section "Step 4 : Loading plate" on page 41) is
linked to the name of the corresponding tracking file
1 . Click on the "Open file" button to open a
tracking file (1).
2 . Select the desired tracking file from the list.
3 . All corresponding events will be indicated on
the information area (2) .
4 . Optional: use the "Information filter" (3)
to select an event type (Preparation or
Manufacturing) .
5 . Optional: use the "+" or "-" buttons (4) to
directly open/close all navigation trees .
6 . Export functions (5): to export the tracking file
("csv", "xml" or "pdf" formats) .
7 . The export button (6) creates a manufacturing
report in "pdf" format (see example
"Manufacturing report" on page 55) .
3D SYSTEMS, INC.
1
5
6
3
54
4
2
PN:80-D27 Rev.B