3D Systems ProX DMP 300 User Manual page 49

Step 8 : Loading of the manufacturing file and inerting
This step consists of :
• Selecting the manufacturing file (*.FAB3 format) created with
• Inerting the manufacturing chamber .
1 . Click on the folder icon to launch the file browser (1).
2 . Select the manufacturing file and click on "Load file" (2).
The Preparation Assistant
3D SYSTEMS, INC.
will then return to the previous page . The inerting phase should then be initiated .
ProX DMP Manufacturing, standalone software,
45
1
2
PN:80-D27 Rev.B