•
Preparation tab
This tab shows the default settings related to the layering sequence:
•
Sequence: name of the layering
sequence used .
•
Layer
thickness: thickness of
the layers (in µm) .
Compacting
rate: percentage
•
of the layer thickness added to
the layer thickness .
•
Compacting
iteration: no
longer used .
•
Powder
raising: value of the
feeding piston rising for each
layer (in µm) .
•
Powder raising
iteration:
number of iterations of the loop in the layering sequence .
•
Initial
descent: value of the first movement (relative position) of the sintering piston. Determine the positions
values of the sintering piston for the iteration scraping (in µm) .
•
Recycling tab
This tab groups the recycling settings .
Recycling after
manufacturing: it defines the duration of recycling at the end of the manufacturing (max value
•
600 min). This function is activated only if the "end of cycle" button has been checked in the
(see section "Manufacturing menu" on page 47) .
3D SYSTEMS, INC.
53
Manufacturing
menu
PN:80-D27 Rev.B