3D Systems ProX DMP 300 User Manual page 47

Step 7 : Lens cleaning
Caution : To ensure process quality, it is important to clean the lens before each job . Consult the section
"Cleaning the laser optic system" on page 61 for details on how to clean the lens .
If no filter replacement required
1 . Perform the actions (1) . Consult the section "Cleaning the laser optic system" on page 61 for details on how to clean
the lens .
Next
2 . Click on (2) to go to the next step .
If filter replacement required
1 . When the Lens cleaner timer value has reached 60 days, the interface will at first prompt to change the Lens cleaner
filter. Proceed to the filter replacement (consult the
3D SYSTEMS, INC.
Maintenance section for details on how to replace the filter).
43
1
2
PN:80-D27 Rev.B