Overview Of The Ident Blocks - Siemens SIMATIC RF170C Operating Instructions Manual

Parameter settings

5.4 Overview of the Ident blocks

5.4 Overview of the Ident blocks
The following table provides an overview of the currently available blocks.
Table 5- 3 Overview of the Ident library
Position
Instructions/ Ident
blocks blocks
Ident profile
36
Symbolic name
Basic Read
blocks
Write
Reset_Reader
Read_MV
Set_MV_Program
Extended Config_Download
blocks
Config_Upload
Inventory
Read_EPC_Mem
Read_TID
Read_UID
Set_ANT_RF300
Set_ANT_RF600
Set_Param
Write_EPC_ID
Write_EPC_Mem
AdvancedCmd
Status Reader_Status
blocks
Tag_Status
Reset Reset_MOBY_D
blocks
Reset_MOBY_U
Reset_MV
Reset_RF200
Reset_RF300
Reset_RF600
Reset_Univ
Ident_Profile
Description
Using these blocks, it is simple to program
communication with the Ident systems.
The basic blocks include all the blocks that are
used often.
Using these blocks, it is simple to program
communication with the Ident systems.
The extended blocks provide functions that are
required less often for operating the Ident
system.
Advanced command set. With the
"AdvancedCmd" block it is possible to access
other commands from the Ident command set
and to execute chained commands.
Using the status blocks you obtain information
onthe reader or transponder.
Using these blocks, it is simple to program
communication with the Ident systems.
The reset blocks are used for simple
initialization of the Ident systems if the
"Reset_Reader" block is not supported by the
Ident system.
These blocks are available for experts to be
able to include complex command structures
in their own program sequence. It is also
possible to use repeat commands and
chaining.
Operating Instructions, 02/2022, J31069-D0176-U001-A6-7618
SIMATIC RF170C