Connection; Terminal Blocks - Siemens SIMATIC 6DL1 136-6AA00-0PH1 Manual

Connection

4.1

Terminal blocks

Definition
The terminal blocks provide the process terminals (push-in terminals) for components to be
connected such as devices.
Description
The following terminal blocks are available for the I/O module:
Article No.
6DL1193-6TP00-0DH1
6DL1193-6TP00-0BH1
6DL1193-6TP00-0DP0
6DL1193-6TP00-0BP0
6DL1193-6TP00-0DN0
6DL1193-6TP00-0BN0
6DL1193-6TP00-0DF1
F-AI 8xI 2-/4-wire HART HA
Equipment Manual, 09/2021, A5E50557845-AA
Color Description
Light gray For single mode
"Enable new potential group"
Dark gray For single mode
"Use potential group of the left module"
Light gray Double-width terminal block with L+ potential distributor
For single operation only
"Enable new potential group"
Dark gray Double-width terminal block with L+ potential distributor
For single operation only
"Use potential group of the left module"
Light gray Double-width terminal block with M potential distributor
For single operation only
"Enable new potential group"
Dark gray Double-width terminal block with M potential distributor
For single operation only
"Use potential group of the left module"
Black Only for redundant interconnection of two F-AI 8xI 2-/4-wire HART HA F-
modules
"Mo potential group"
4
15