Iii.18 Download Power Data - PCE Instruments PCE-830 User Manual

III.18 Download Power Data

1. Press the SETUP button.
2. The "Down Load File" will be shown in reverse video.
3. Press the ▲ or ▼ button to select file number.
4. If the data stored in a selected file is power data, a leading symbol "P" will be
shown in front of the file number
5. Press EXIT button.
6. When the unit receives a CTRL D command through the RS-232C port, it will
down load stored power data.
NOTE:
In the setup mode, the unit will not accept any command through RS-232C port.
To down load data, users must press the EXIT button to return to normal
measurement mode.
39