Definition of Symbols:
Over-voltage category III (CAT III):
equipment in fixed installations.
WARNING: If the power analyzer is used in a manner
Not specified by the manufacturer, the protection
Prov ided by the clamp meter may be impaired.
Please read the following instructions before usage
1. Do not operate in wet or dusty environments.
2. Do not operate in presence of combustible or explosive gas
3. Do not touch exposed metal parts, unused terminals.
4. Consider the use of rubber glove in operation.
5. Do not operate in excess of AC 500V (Phase to Neutral), or
AC 600V (Phase to Phase)
6. Do not operate when the unit seems to be mal-functioning
EN 61010-2-032
CAT III 600V
Pollution Degree 2
Caution: Refer to Accompanying Documents
Caution: Risk of Electric Shock
Double Insulation