Iii.3 Power Quality Of A Single Phase (1P2W) System - PCE Instruments PCE-830 User Manual

III.3 Power Quality of a Single Phase (1P2W) System

POWER
a. Turn the power on. Press the POWER and the 1Φ3Φ buttons to select
the 1P2W system. The type of system will be displayed at the bottom
right of the LCD
b. Connect the two test leads to the voltage terminals L1 and V
the system.
c. Connect one current probe to the power analyzer input terminal I1.
d. Clamp on to the L1. Make sure the current flows from the front of the
current probe to the back of it.
e. All following parameters of the system will be shown in LCD
For the meaning of each parameter, refer to XIV. NOMENCLATURE.
V
N
V
1
19
1 2W
I
1
100A
(HARMON)
100A
(POWER)
60A
(HARMON)
10A
1A
(Neutral) of
N