Table of Contents
Advertisement
4. Hz: set up the frequency (50, 60 or AUTO) of the system.
5. PT: set up PT value.
6. CT: set up CT value.
7. SEC: set up the interval seconds of logged data.
8. CLAMP: set up the clamps selected (100A, 1000A, 3000A or 1200A).
9. MD TIME: set up the time of Maximum Demand (1~60 minutes).
10. TRANS REF: set up the transient voltage (which will be automatically changed
11. SDVP: set up upper and lower limits % of transient voltage detection.
12. YEAR: Set up "year" of calendar clock.
13. MONTH: Set up "month" of calendar clock.
14. DATE: Set up "date" of calendar clock.
15. HOUR: Set up "hour" of calendar clock.
16. MINUTE: Set up "minute" of calendar clock.
17. SECOND: Second can be displayed only (it can not be adjusted).
in accordance with PT).
14
Advertisement
Table of Contents
