Ppp Username And Password - D-Link DSL-3682 User Manual

Section 3 - Configuration
If you selected PPPoE over Ethernet (PPPoE) or PPP over ATM (PPPoA), configure the
PPP Username and Password options:

PPP USERNAME AND PASSWORD

PPP Username: Enter the username provided by your ISP.
PPP Password: Enter the password provided by your ISP.
Confirm PPP Enter the password provided by your ISP one more time.
Password:
Select the authentication protocol your ISP uses. The options are PAP,
Authentication
CHAP, MS-CHAP, or AUTO.
Method:
Dial-up mode:
Select how your DSL-3682 connects to your ISP. Choose either
AlwaysOn, OnDemand, and Manual. This may be useful if you are
using a metered connection.
Inactivity Timeout: If you selected OnDemand, enter the amount time the router waits
if there is no activity before disconnecting.
MRU Size:
Enter the maximum receive unit (MRU) packet size. The default is 1492.
MTU Size:
Enter the maximum transmission unit (MTU) packet size. The default
is 1400.
Keep Alive:
Check the box in order to maintain your connection.
Lcp Echo Interval
Enter the Lcp Echo frequency.
(sec):
Lcp Echo Failure: Enter the Lcp Echo Failure.
D-Link DSL-3682 User Manual
PPP Username and Password
CONNECTION TYPE
PPP over Ethernet (PPPoE)
Protocol :
PPP over ATM (PPPoA)
PPP USERNAME AND PASSWORD
PPP Username :
PPP Password :
Confirm PPP Password :
Authentication Method : AUTO ▼
Dial-up mode : AlwaysOn ▼
Inactivity Timeout : 100
MRU Size : 1492
MTU Size : 1400
☑
Keep Alive :
Lcp Echo Interval (sec) : 30
Lcp Echo Failure :
5
☐
Use Static IP Address :
IP Address :
☑
IANA :
☑
Prefix Delegation :
▼
(Minute 1~1092)
(V4:576~1492 V6:1280~1492)
(V4:576~1492 V6:1280~1492)
32