Atm/Adsl - D-Link DSL-3682 User Manual

Section 3 - Configuration
ATM PVC CONFIGURATION
VPI: Virtual path identifier (VPI) is the virtual path between two points
in an ATM network. Its valid value is between 0 and 255. Enter the
correct VPI provided by your ISP.
VCI: Virtual channel identifier (VCI) is the virtual channel between two
points in an ATM network. Its valid value is between 32 and 65535.
Enter the correct VCI provided by your ISP.
Select the Service Category your ISP uses. The options are UBR
Service Category:
Without PCR, UBR With PCR, CBR, Non Realtime VBR, or Realtime
VBR.
If you selected UBR With PCR, CBR, Non Realtime VBR, or Realtime VBR configure the
Peak Cell Rate:
Peak Cell Rate: Enter the Peak Cell Rate
If you selected Non Realtime VBR or Realtime VBR configure the the following options:
Sustainable Cell Enter the Sustainable Cell Rate.
Rate:
Maximum Burst Enter the Maximum Burst Size.
Size:
Proceed to Connection Type on page 30.
D-Link DSL-3682 User Manual

ATM/ADSL

DSL MODE CONFIGURATION
DSL Mode : ATM ▼
ATM PVC CONFIGURATION
VPI :
0 (0-255)
VCI : 35 (32-65535)
UBR Without PCR
UBR With PCR
Service Category : CBR
Non Realtime VBR
Realtime VBR
Peak Cell Rate :
0 (cells/s)
Sustainable Cell Rate : 0 (cells/s)
Maximum Burst Size : 0 (cells)
▼
29