System Log - D-Link DSL-3682 User Manual

Section 3 - Configuration
The DSL-3682 keeps a running log of events and activities occurring on the router. You may
send these logs to a SysLog server on your network.
SYSTEM LOG -- CONFIGURATION
Configure your settings and click Traceroute to run the test.
Enable Log: Check to enable or disable logging
Select to record the log to Local, Remote, or Both.
Mode:
Server IP Address:
Enter an IP address for the remote logging server.
Server UDP Port:
Enter the UDP port of the remote server.
Click Apply to have your changes take effect.
You can view the current log by clicking the View System Log button.
D-Link DSL-3682 User Manual

System Log

DSL-3682 MANAGEMENT
System Log SYSTEM LOG
Internet Setup
SYSTEM LOG
If the log mode is enabled, the system will begin to log all the selected events. If the selected mode is "Remote" or "Both", events will
2.4G Wireless
be sent to the specified IP address and UDP port of the remote syslog server. If the selected mode is "Local" or "Both", events will be
recorded in the local memory.
Select the desired values and click "Apply" to configure the system log options.
5G Wireless
Note: This will not work correctly if modem time is not properly set! Please set it in "Setup/Time and Date"
Local Network
SYSTEM LOG -- CONFIGURATION
☑
Enable Log
Local IPv6 Network
Mode :
Local ▼
Server IP Address :
Time and Date
Server UDP Port :
Apply Cancel View System Log
Logout
STATUS
121