Wireless Basic - D-Link DSL-3682 User Manual

Section 3 - Configuration
This page allows you to manually configure the router's wireless connectivity settings. To
change your wireless network security settings refer to Wireless Security on page 48.
WIRELESS BASIC CONFIGURATION
Enable Wireless: Check this box to enable the 5 GHz wireless network.
AP Isolate: Check this box to enable AP isolation. AP isolation forces wireless
clients to communicate with each other through the access point.
SSID: The wireless network name for your network. To change your SSID,
enter a new name and click Apply. Remember to update the settings
on your devices.
Visibility Status: Visible networks conveniently advertise their existence to devices
looking for Wi-Fi networks to join, Invisible, or hidden, networks
do not. To join an invisible network users must manually input its
SSID. Note: Making a network Invisible is not a form of security.
Continent/
This section shows the current regional/country wireless frequencies
Country:
the device is set to use. This option may be set by the firmware/factory
and unable to modify.
802.11 Mode:
Select the wireless standards to use on your network. The options
are 802.11a only, 802.11a/n mixed, or 802.11a/n/ac mixed.
Band Width: Choose the transmission channel bandwidth. The options are 20M,
20/40M, 40M, or 20/40/80M.
Wireless Channel:
Select the channel number for your wireless network to operate
on. These options are region-dependent. The default is Auto Scan.
The wireless channel currently in use is displayed in red text.
Click Apply to have your changes take effect.
D-Link DSL-3682 User Manual

Wireless Basic

DSL-3682 SETUP
5G Wireless WIRELESS BASIC CONFIGURATION
Internet Setup
WIRELESS BASIC CONFIGURATION
Use this section to configure the wireless settings for your router. Please note that changes made in this section will also need to be
2.4G Wireless
duplicated to your wireless clients and PC.
5G Wireless
WIRELESS BASIC CONFIGURATION
Local Network
☑
Enable Wireless :
Local IPv6 Network
☐
AP Isolate :
Time and Date
SSID : Your_5G Wi-Fi_Network
Logout
Visibility Status : ž Visible š Invisible
Continent/Country : Europe
802.11 Mode : 802.11a/n/ac mixed
Band Width:
20/40M/80M
Wireless Channel: Auto Scan(recommended)
Currently used wireless
channel is 36
Apply Cancel
ADVANCED
▼
▼
▼
▼
47