Pppoe (Username/Password) - D-Link DWR-112 User Manual

Section 3 - Configuration
Choose PPPoE (Username/Password) from the My Internet Connection is drop-down menu if your ISP uses a
PPPoE connection. Your ISP will provide you with a username and password. This option is typically used for DSL
services. Make sure to remove any PPPoE software from your computer. The software is no longer needed and will
not work through a router.
Address Select Static if your ISP assigned you the IP
Mode:
address, subnet mask, gateway, and DNS
server addresses. In most cases, select
Dynamic.
Enter the IP address (Static PPPoE only).
IP Address:
Enter your PPPoE user name.
User Name:
Enter your PPPoE password and then retype
Password:
the password in the next box.
Enter the ISP Service Name (optional).
Service Name:
Select either Always-on, On-Demand, or
Reconnect Manual.
Mode:
Enter a maximum idle time period during
Maximum Idle
which and inactive Internet connection will be
Time: maintained before being dropped. To disable
this feature, enable Auto-reconnect.
D-Link DWR-112 User Manual
Manual Configuration (Wi-Fi Mode)

PPPoE (Username/Password)

29