D-Link DSL-3682 User Manual page 39

Section 3 - Configuration
If you selected MAC Encapsulation Routing(MER) or IP over ATM (IPoA), configure the
WAN IP Settings options:
Use the following Check the box if you would like to enter IP address information. (MAC
Encapsulation Routing Only.)
address:
If you selected Use the following address and IPv4 or Both as the IP Protocol, configure
the following options.
WAN IP Address: Enter your WAN IP address.
WAN Subnet
Enter your WAN subnet mask address.
Mask:
Default gateway:
Enter your Default Gateway.
Preferred DNS
Enter your preferred DNS server.
server:
Alternate DNS
Enter your alternate DNS server.
server:
If you selected Use the following address and IPv6 or Both as the IP Protocol, configure
the following options.
WAN IPv6
Enter your WAN IPv6 address.
Address:
Address Prefix Enter your WAN IPv6 address prefix length.
length:
WAN IPv6 Enter your IPv6 Gateway.
Gateway:
D-Link DSL-3682 User Manual
WAN IP Settings
WAN IP SETTINGS
CONNECTION TYPE
MAC Encapsulation Routing(MER)
Protocol :
IP over ATM (IPoA)
WAN IP SETTINGS
☐
Use the following address :
WAN IP Address :
WAN Subnet Mask :
Default gateway :
Preferred DNS server :
Alternate DNS server :
WAN IPv6 Address :
Address Prefix length :
WAN IPv6 Gateway :
WAN IPv6 Prefix :
WAN IPv6 Prefix length :
Preferred IPv6 DNS server :
Alternate IPv6 DNS server :
☐
IANA :
☐
IPv6 Prefix Delegation :
▼
34