Ping - D-Link DSL-3682 User Manual

Section 3 - Configuration
The Ping section enables you to run an IPv4 connectivity test.
Configure your settings and click Traceroute to run the test.
Protocol: Select IPv4 or IPv6 to run the test on.
Host: Enter a host to ping.
Number of retries:
Enter a value for the number of times you would like to ping the host.
Timeout:
Enter a timeout value before a failure is declared.
Packet Size:
Enter a value for the ping packet size.
WAN Connection:
Select a WAN connection from the drop-down menu to use for the
ping test.
The results of the ping test are displayed here.
D-Link DSL-3682 User Manual

Ping

RESULT
DSL-3682 MANAGEMENT
Diagnostics PING DIAGNOSTICS
Internet Setup
PING DIAGNOSTICS
Ping diagnostics used to test the reachability of a host on a network and to measure the round-trip time for messages sent from the
2.4G Wireless
originating host to a destination computer.
5G Wireless
Protocol : IPv4
Local Network Host : 8.8.8.8
Number of retries : 5
Local IPv6 Network
Timeout : 1
Packet Size : 56
Time and Date
WAN Connection : VDSL
Ping
Logout
RESULT
STATUS
▼
▼
119