Static Route - D-Link DSL-3682 User Manual

Section 3 - Configuration
The Static Routes section allows you to define custom routes to control how data traffic is
moved around your network.
ROUTING -- STATIC ROUTE
The currently defined Static Routes are displayed here. A total of 30 static routes may be
defined. If you wish to create a new rule, click the Add button. If you wish to remove a rule,
select it from the table and click the Delete button. If you wish to edit a rule, select it from
the table and click the Edit button.
Destination Enter the IP address of the destination router.
Network Address:
Subnet Mask: Enter the subnet mask of the destination IP address.
Use Gateway IP Enter the IP address of the gateway router to be used.
Address:
Use Interface: Select the interface to be used from the drop-down menu.
Click Apply to have your changes take effect.
D-Link DSL-3682 User Manual
STATIC ROUTE ADD

Static Route

DSL-3682 ADVANCED
Routing STATIC ROUTE
Internet Setup
STATIC ROUTE
Enter the destination network address, subnet mask, gateway AND/OR available WAN interface then click "Apply" to add the entry to
2.4G Wireless
the routing table.
A maximum 30 entries can be configured.
5G Wireless
ROUTING -- STATIC ROUTE
Local Network
Destination Subnet Mask
Local IPv6 Network Add Edit
Time and Date
STATIC ROUTE ADD
Destination Network Address :
Logout
Subnet Mask :
Use Gateway IP Address :
Use Interface : VDSL
Apply
MANAGEMENT
Gateway Interface
Delete
▼
Cancel
102