Local Access Control - D-Link DSL-3682 User Manual

Section 3 - Configuration
The Local Access Control section enables you to specify which services can be accessed by a
host on the local network. This page is used in conjunction with the IP Address ACL option.
Be careful when adding or deleting ACL rules, as you may accidentally lock yourself out of
the router, requiring the device to be reset.
LOCAL ACCESS CONTROL -- SERVICE
Enable Local Check to enable or disable remote access to the following services.
Access:
Choose a Select a connection interface from the available options in the drop-
Connection: down menu.
Select and configure the services you wish to enable. Click Submit to have your changes
take effect.
D-Link DSL-3682 User Manual

Local Access Control

IPV4 ACL
DSL-3682 MANAGEMENT
Access Controls LOCAL ACCESS CONTROL
Internet Setup
LOCAL ACCESS CONTROL
You can set a service control list (SCL) to enable or disable services from being used.
2.4G Wireless
5G Wireless
LOCAL ACCESS CONTROL -- SERVICE
☑
Enable Local Access :
Choose A Connection : Lan1
Local Network
Local IPv6 Network
IPV4 ACL
Service Enable Source IP Source Mask
☐
Time and Date FTP 0.0.0.0 0.0.0.0
☑
HTTP 0.0.0.0 0.0.0.0
☑
ICMP 0.0.0.0 0.0.0.0
Logout
☐
SNMP 0.0.0.0 0.0.0.0
☐
SSH 0.0.0.0 0.0.0.0
☑
TELNET 0.0.0.0 0.0.0.0
☐
TFTP 0.0.0.0 0.0.0.0
☑
DNS 0.0.0.0 0.0.0.0
☐
TR069 0.0.0.0 0.0.0.0
Submit Refresh
STATUS
▼
Protocol Port
TCP 21
TCP 80
ICMP -
UDP 161
TCP 22
TCP 23
UDP 69
UDP 53
TCP 7547
113