D-Link DSL-3682 User Manual page 96

Section 3 - Configuration
Vlan ID: Enter the VID (VLAN ID) is the identification of the VLAN, which is used
by the standard 802.1Q. It has 12 bits and allows the identification of
4096 (2^12) VLANs. The maximum possible VLAN configurations are
4,094.
DSCP:
Select the queue priority number.
Queue #:
Select the queue priority number.
DSCP Remark: The DSCP range can be between 0 to 63.
802.1p Remark: Select this option to Activate/Deactivated the 802.1p. IEEE 802.1p
establishes eight levels of priority (0 ~ 7). Although network
managers must determine actual mappings, IEEE has made broad
recommendations.
Seven is the highest priority which is usually assigned to network-
critical traffic such as Routing Information Protocol (RIP) and Open
Shortest Path First (OSPF) table updates. Five and six are often for
delay-sensitive applications such as interactive video and voice. Data
classes four through one range from controlled-load applications
such as streaming multimedia and business-critical traffic - carrying
SAP data, for instance - down to "loss eligible" traffic. Zero is used as
a best-effort default priority, invoked automatically when no other
value has been set.
Queue #: Select Low, Medium, High or Highest.
Click Save to add the QoS Rule.
D-Link DSL-3682 User Manual
QoS - Add a Rule (continued)
ACTIONS
DSL-3682 ADVANCED
QoS ADD QOS CLASSIFICATION RULES
Internet Setup
RULE
Classify Type : ž Upstream FLow Classify
2.4G Wireless
Actions : ž Enable š Disable
Application : Not Match ▼
5G Wireless
Physical Ports : Local
Destination MAC Address :
Local Network
Destination IP Address :
Destination Subnet Mask :
Local IPv6 Network
Destination Port Range :
~
Source MAC Address :
Time and Date
Source IP Address :
Logout
Source Subnet Mask :
Source Port Range : ~
Protocol : Not Match ▼
Vlan ID :
DSCP : Not Set
802.1p : Not Match
▼
ACTIONS
DSCP Remark : Not Set
802.1p Remark : Not Set
▼
Queue : Unbound
▼
Save Back
MANAGEMENT
▼
▼
▼
Not Set
▼
91