D-Link DSL-3682 User Manual page 20

Section 3 - Configuration
STEP 1: SET TIME AND DATE
This step allows you to edit the system time or Network Time Protocol (NTP). You can
configure, update, and maintain the correct time on the system clock, and configure Daylight
Saving.
If you choose Automatically synchronize with Internet time servers, please configure
the following fields:
1st NTP time server : Enter the address of the NTP server to connect to.
2nd NTP time server : Enter the address of a backup NTP server to connect to.
Time Zone: Select the time zone you are in from the dropdown menu.
If you choose Enable Daylight Saving, please configure the following fields:
Daylight Saving Start: Select the start date of daylight saving.
Daylight Saving End: Select the end date of daylight saving.
D-Link DSL-3682 User Manual
Wizard - Step 1 - Time and Date
TIME SETTING
TIME CONFIGURATION
STEP 1: SET TIME AND DATE
The Time Configuration option allows you to configure, update,
and maintain the correct time on the internal system clock. From
this section you can set the time zone that you are in and set the
NTP (Network Time Protocol) Server. Daylight Saving can also
be configured to automatically adjust the time when needed.
TIME SETTING
☑ Automatically synchronize
with Internet time servers
1st NTP time server :
ntp1.dlink.com
2nd NTP time server :
Time Configuration:
Time Zone:
(GMT+08:00) Beijing, Hong Kong
☑
Enable Daylight Saving
2016 Year 03
Daylight
Saving
Start:
03 Hour 03
2016 Year 11
Daylight
Saving End:
03 Hour 03
Back Next
→ 2 → 3 → 4
▼
Mon 03 Day
Min 03 Sec
Mon 03 Day
Min 03 Sec
Cancel
15