Section 3 - Configuration
NETWORK ADDRESS TRANSLATION SETTINGS
If you selected IPv4 or Both as the IP Protocol, configure the following options.
Enable NAT:
Check this box to Enable Network Address Translation (NAT).
NAT Type:
Select either Symmetric NAT or Full Cone NAT.
If you selected IPv6 or Both as the IP Protocol, configure the following options.
Enable Service:
Check this box to enable the service once added.
Firewall Enable:
Check this box to enable the firewall.
Backup3G Enable:
Check this box to enable 3G/4G backup.
Service Name:
Enter a name for this service.
Click Apply when you are done.
D-Link DSL-3682 User Manual
Network Address Translation Settings
NETWORK ADDRESS TRANSLATION SETTINGS
☑
Enable NAT :
NAT Type :
Symmetric Nat
☑
Enable Service :
☑
Firewall Enable :
☑
Backup3G Enable :
Service Name :
ADSL/VDSL
Apply
Cancel
▼
36