Can't Access Web Configurator; Forgotten Login Username And Password - D-Link DSL-2600U User Manual

Adsl2+ wireless router
Hide thumbs Also See for DSL-2600U:
Table of Contents

Advertisement

Reset your ADSL line to reinitialize your link to the DSLAM.
3
If the problem persists, contact your local distributor for assistance.
4

Can't Access Web Configurator

I cannot access the Web configurator.
STEPS
1
Make sure you are using the correct IP address of the router. Check the IP
address of the router.
Make sure that a console session isn't running.
2
3
Check that you have enabled Web service access. If you have configured a secured
client IP address, your computer's IP address must match it. Refer to the chapter on
remote management for details.
4
For WAN access, you must configure remote management to allow server access from
the WAN (or all).
Your computer's and the router's IP addresses must be on the same subnet for
5
LAN access.
If you changed the router's LAN IP address, enter the new one as the URL.
6
7
Remove any filters in LAN or WAN that block Web service.
The Web configurator does not display properly.
STEPS
1
Make sure you are using Internet Explorer 5.0 or later versions.
2
Delete the temporary Web files and log in again.
In Internet Explorer, click Tools, Internet Options and then click the Delete Files ...
button. When a Delete Files window displays, select Delete all offline content and
click OK. (Steps may vary depending on the version of your Internet browser.)

Forgotten Login Username and Password

I forgot my login username or password.
STEPS
CORRECTIVE ACTION
CORRECTIVE ACTION
CORRECTIVE ACTION
63

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents