Pppoe (Username/Password) - D-Link DIR-412 User Manual

Section 3 - Configuration
Choose PPPoE (Username/Password) from the My Internet Connection is drop-down menu if your ISP uses a
PPPoE connection. Your ISP will provide you with a username and password. This option is typically used for DSL
services. Make sure to remove your PPPoE software from your computer. The software is no longer needed and will
not work through a router.
Select Static if your ISP assigned you the IP
Address Mode:
address, subnet mask, gateway, and DNS
server addresses. In most cases, select
Dynamic.
IP Address: Enter the IP address (Static PPPoE only).
User Name: Enter your PPPoE user name.
Password: Enter your PPPoE password and then retype
the password in the next box.
Service Name: Enter the ISP Service Name (optional).
Select either Always-on, On-Demand, or
Reconnect
Manual.
Mode:
Maximum Idle Enter a maximum idle time during which the
Time: Internet connection is maintained during
inactivity. To disable this feature, enable Auto-
reconnect.
D-Link DIR-412 User Manual
Manual Configuration (WAN Mode)

PPPoE (Username/Password)

28