Wps Settings - D-Link DSL-3682 User Manual

Section 3 - Configuration
The WPS Settings page allows you to configure the Wi-Fi Protected Setup (WPS) feature of
your DSL-3682 which allows to create a secure wireless connection.
Wireless SSID: Select the Wireless SSID of the network you wish to configure.
WPA Mode: The currently set WPA mode is displayed.
Pre-Shared Key: The current pre-shared key is displayed or obscured.
WI-FI PROTECTED SETUP CONFIG
If you Enable WPS, the following configuration options are available:
Push Button: Click PBC to activate the WPS-PBC (push-button) method.
Select Mode: Select either AP PIN or STA PIN. Using WPS-PIN is no longer
recommended due to security vulnerabilities.
Select AP PIN the following options are available:
AP PIN: The currently configured AP PIN is displayed. Click New PIN to create
a new PIN.
Click Start to connect to the device.
Trigger AP PIN:
Select STA PIN the following options are available:
Enter a PIN. Click Start to begin WPS-PIN.
Input Station PIN:
WPS Session Displays the current WPS status.
Status:
Click Apply to have your changes take effect.
D-Link DSL-3682 User Manual

WPS Settings

WPS
DSL-3682 ADVANCED
2.4G Advanced
WPS
Wireless
WPS
Internet Setup
The WPS condition must be WPA-PSK or WPA2-PSK security mode , and the SSID should be broadcasted.
Wireless SSID :
Your_2.4G Wi-Fi_Network
2.4G Wireless
WPA Mode : WPA2 Mixed-PSK
Pre-Shared Key : ********
5G Wireless
WI-FI PROTECTED SETUP CONFIG
Local Network
☑
Enabled WPS
Push Button : PBC
Local IPv6 Network
Select Mode : AP PIN
Trigger AP PIN: 12345670
Time and Date
Start
Trigger AP PIN :
Logout
WPS Session Status :
WI-FI PROTECTED SETUP CONFIG
☑
Enabled WPS
Push Button : PBC
Select Mode : STA PIN
Input Station PIN :
WPS Session Status :
Apply Cancel
MANAGEMENT
▼
▼
New PIN
▼
Start
69