Port Trigger - D-Link DSL-3682 User Manual

Section 3 - Configuration
Port triggering allows ports to be opened for remote access if triggered by activity by a local
computer on specified ports.
The currently defined Port Trigger Rules are displayed here. A total of 32 port trigger rules
may be defined. If you wish to create a new rule, click the Add button. If you wish to remove
a rule, select it from the table and click the Delete button. If you wish to edit a rule, select
it from the table and click the Edit button.
Service Name: Enter a name for the server or service.
Enable Port Check this to enable the port trigger feature.
Trigger:
Rule Status: Select whether to Enable or Disable this rule.
Trigger Port Start/ Enter the starting and ending port to monitor to trigger this rule.
End:
Trigger Protocol:
Select the protocol to monitor for to trigger this rule.
Open Port Start/
Enter the starting and ending port to open when the rule is triggered.
End:
Open Protocol: Enter the protocol to allow through the opened ports.
Click Apply to have your changes take effect.
D-Link DSL-3682 User Manual

Port Trigger

PORT TRIGGER
DSL-3682 ADVANCED
Port Trigger PORT TRIGGER
Internet Setup
PORT TRIGGER
Port Trigger let the device to open TCP or UDP port to access the connection from remote host when the specified port has been
2.4G Wireless
opened by lanside connection according to the rule. Usually the port which has been opened is different from the port which will be
opened by the device. A maximum of 32 entries can be configured.
Select the service name, and fill the blanks of trigger port and new opened port. Rule can be enable or disable separately.
☑
Enable Port Trigger
5G Wireless
Local Network
PORT TRIGGER SETUP
Trigger Port Range
Service Name Trigger Protocol
Local IPv6 Network
Add Edit
Time and Date
PORT TRIGGER SETUP
Remaining number of entries that can be configured: 32
Logout
Service Name :
Rule status : Enable
▼
Trigger Port Start Trigger Port End Trigger Protocol Open Port Start
TCP
▼
Apply Cancel
MANAGEMENT
Open Protocol Open Port Range Status
Delete
Open Port End Open Protocol
TCP
▼
79