Connection Type - D-Link DSL-3682 User Manual

Section 3 - Configuration
Protocol: Select the connection protocol your ISP uses from the drop-down
menu. The options change depending upon protocol selected. You
can choose between PPP over Ethernet(PPPoE), MAC Encapsulation
Routing(MER), IP over ATM (IPoA), or Bridging. The most common
type of connection is PPPoE. Use MER if your provider does not provide
IP routing. Use Bridging if you are connecting another router to this
device.
If you selected PPP over Ethernet(PPPoE), PPP over ATM(PPPoA), IP over ATM (IPoA), or
MAC Encapsulation Routing(MER), configure the following options.
Select Internet, TR069, or Internet_TR069. This option effects
WAN Service Type:
available Network Address Translation Settings. In most cases select
Internet. Select TR069 if your ISP manages your equipment remotely.
Encapsulation Select the type of encapsulation your ISP uses, either Logical Link
Mode: Control (LLC) or Virtual Circuit Multiplexing (VC-Mux).
802.1Q VLAN ID: Enter the 802.1Q VLAN ID if your ISP offer a High Priority Committed
Information Rate (CIR). This guarantees the bandwidth required for
real time voice and video applications. Not available for IPoA.
Select the IP protocol your ISP uses. The options are IPv4, IPv6, or
IP Protocol:
Both.
If you selected PPP over Ethernet(PPPoE) or PPP over ATM(PPPoA), proceed to PPP
Username and Password on page 32.
If you selected MAC Encapsulation Routing(MER) or IP over ATM (IPoA), proceed to WAN
IP Settings on page 34.
D-Link DSL-3682 User Manual

Connection Type

CONNECTION TYPE CONNECTION TYPE
PPP over ATM (PPPoA)
PPP over Ethernet (PPPoE)
Protocol :
MAC Encapsulation Routing(MER)
IP over ATM (IPoA)
Bridging
CONNECTION TYPE
PPP over ATM (PPPoA)
PPP over Ethernet (PPPoE)
Protocol :
MAC Encapsulation Routing(MER)
IP over ATM (IPoA)
WAN Service Type : Internet
Encapsulation Mode : LLC ▼
802.1Q VLAN ID : 0 (0 = disable, 1 - 4094)
IP Protocol : Both ▼
▼
▼
▼
30