D-Link DSL-3682 User Manual page 88

Section 3 - Configuration
Recovery delay Specify a period to re-dial.
time:
Initialization Specify a period for the 3G/4G connection to initialize.
Delay time:
Mode Switch
Specify a period to allow for a mode switch.
Delay time:
Backup Select a WAN connection to use if 3G/4G fails.
Mechanism:
Checking IP
Specify an IP Address to test the 3G/4G connection.
address:
Timeout: Specify a period of inactivity after which an established 3G/4G session
is terminated. Set to zero or choose Auto in Reconnect Mode to disable
this feature.
Period time: Specify a period for DSL or Ethernet uplink to be disconnected.
Fail Tolerance: Specify the number of failures before using the backup connection.
Click Apply to have your changes take effect.
Click Autoset to attempt to determine these settings automatically.
D-Link DSL-3682 User Manual
3G/4G Configuration (continued)
DSL-3682 ADVANCED
3G/4G Configuration 3G/4G WAN CONFIGURATION
Internet Setup
3G/4G WAN CONFIGURATION
Choose "Add", "Edit", or "Delete" to configure 3G/4G WAN interfaces.
2.4G Wireless
When you want to edit the 3G/4G configuration, please ensure the 3G/4G is in disconnection status at first.
5G Wireless
3G/4G WAN SETUP
3G/4G Status: NoDongle
Inform: NO USB CARD
Local Network
3G/4G WAN SETUP Local IPv6 Network
Service Name Protocol State
Time and Date
3G WAN SETUP
☑
Logout
Enable 3G Service :
☐
Enable NDIS :
☐
Enable DHCP :
Account : any
Password : ***
Dial_Number : *99#
Net Type : Auto ▼
APN :
☐
OnDemand :
Inactivity Timeout :
1 (Minuter [1~1092]. But if 0, we will set default value)
Backup delay time : 60 (Seconds [0-600])
Recovery delay time : 60 (Seconds [0-600])
Initialization Delay time :
20 (If too small, some 3g dongle will be unsupported)
Mode Switch Delay time : 20 (If too small, some 3g dongle will be unsupported)
BackupMechanism : DSL ▼
Checking IP address: 8.8.8.8
Timeout (in sec.): 1
Period time (in sec.): 1
Fail Tolerance: 1
Apply AutoSet
MANAGEMENT
Status Default Gateway Action
Cancel
83