Igmp Proxy - D-Link DSL-3682 User Manual

Section 3 - Configuration
Creating an IGMP proxy enables the system to issue IGMP host messages on behalf of hosts
that the system has discovered through standard IGMP interfaces. This allows the system to
act as a proxy for its hosts after being enabled.
IGMP PROXY CONFIGURATION
WAN Interface: Select the WAN interface you wish to configure.
Select either IGMP V1, IGMP V2, or IGMP V3 from the list.
IGMP Version:
Enable IGMP Proxy: Select the LAN connection to use.
Enable Select this box to enable PassThrough.
PassThrough:
Click Apply when you are done.
The current IGMP Proxy Status is listed on this table.
D-Link DSL-3682 User Manual

IGMP Proxy

IGMP TABLE
DSL-3682 ADVANCED
Network Tools IGMP PROXY
Internet Setup
IGMP PROXY
IGMP proxy enables the system to issue IGMP host messages on behalf of hosts that the system discovered through standard IGMP
2.4G Wireless
interfaces. The system acts as a proxy for its hosts when you enable it by:
1. Enabling IGMP proxy on a WAN interface (upstream), which connects to a router running IGMP.
2. Enabling IGMP on a LAN interface (downstream), which connects to its hosts.
5G Wireless
IGMP PROXY CONFIGURATION
WAN Connection : ADSL
Local Network
IGMP Version : IGMP V3
☐
Local IPv6 Network Enable IGMP Proxy :
☐
Enable PassThrough :
Time and Date
Apply Cancel
Logout
IGMP TABLE
Group Address Interface
Refresh
MANAGEMENT
▼
▼
State
96