Figure 2.2 Wiring For Apax-5013 - Advantech APAX-5013 User Manual

Application Wiring
APAX-5013 Technical Specifications
Channels: 8

Input Impedance: >10 M

Input Type: Pt-100, Pt-200, Pt-500, Pt-1000, Balco, Ni 518 RTD (2-wire and 3-wire)

Temperature Range: Pt-100,Pt-200,Pt-500,Pt-1000: -120~130C, -200~850C
Supports IEC 60751 ITS90 (0.03851// C) and JIS C 1604 (0.03916 // C)
–
– Balco 500: -30 ~ 120 C
– Ni 518: -80 ~ 100 C, 0 ~ 100 C

Configure Different Range for Each Channel: Yes

Resolution: 16-bit

Accuracy: ±0.1 % of FSR (at 25 C)

Sampling Rate: 50 Hz filter: 8 sample/second (total)

CMR @ 50/60 Hz: 90 dBs

NMR @ 50/60 Hz: 60 dBs

Noise Suppression for Frequency: 50/60 Hz

Span Drift: 15 ppm/ C

Input Characteristic Curve: According to IEC 61131-2

Wire Burnout Detection: All RTD type
Protection

Isolation: 2,500 VDC (Between channels and backplane)
Environment

Operating Temperature: -10 ~ 60 C (when mounted vertically)

Storage Temperature: -40 ~ 70 C

Relative Humidity: 5 ~ 95% (non-condensing)
General

Dimensions (W x H x D): 30 x 139 x 100 mm

Weight: 170 g

Power Consumption: 2.5 W @ 24 VDC (typical)

Figure 2.2 Wiring for APAX-5013

60 Hz filter: 10 sample/second (total)
27 APAX-5000 I/O User Manual