Advantech APAX-5013 User Manual page 70

APAX-5080 Specifications
Digital Input

Channels: 4

Input Voltage
– For "0" Signal: 0 ~ 3 VDC
– For "1" Signal: 10 ~ 30 VDC

Input Current: 5~15 mA (For Signal "1", typical)

Minimum Pulse Width: 500 ns (Max. Input Frequency)
Digital Output

Channels: 4

Voltage Range: 8 ~ 35 VDC

Output Current at Signal "1"
– Rated: 0.5 A
– Permitted: 0.75 A (max.)

Output Current at Signal "0"10A
– (Leakage Current)

Output Delay at Resistive Load
– From logic level "0" to "1"100 s (max.)
– From logic level "1" to "0"200 s (max.)
Counter Input

Modes: Pulse and Direction, Up/Down, Up Pulse, A/B phase and Frequency

Channels: 4 (Pulse and Direction, Up/Down, and A/B phase mode)
– 8 (Up Pulse and Frequency mode)

Counting Range: 32-bit + 1-bit overflow/underflow

Minimum Pulse Width: 500 ns

Input Frequency (max.): 1 MHz

Input Voltage
– For "0" Signal0 ~ 3 VDC
– For "1" Signal10 ~ 30 VDC

Input Current: 5~15 mA (For Signal "1", typical)

Digital Noise Filter: 1~65000 s (programmable)
Protection

Isolation: 2500 VDC (Between channels and backplane bus)

Over Voltage Protection: 50 VDC (all channels)
– 110 VDC (single channel) (for DI and Counter Input channels)

Short Circuit Protection: Yes (for DO channels)
Environment

Operating Temperature: -10 ~ 70° C (14 ~ 158° F)

Storing Temperature: -25 ~ 85° C (-13 ~ 185° F)

Storing Humidity: 5 ~ 95% RH (non-condensing)
APAX-5000 I/O Series User Manual 62